Started buy undercoating Necron tomb citadel tile with black and white citadel spay paint, in order to get a bright green colour to take well. Used masking tape to cover the areas that I will later spray with a sepia wash. I then used a fishing net (landing net) that had the desired weave to act as a mask, therefore leaving a repeating hexagon patern of green on black. ...
Updated 07-05-2013 at 08:07 PM by payzahh
Post 2: Creating the base. A router with a round-over edge forming bit, was used on the top side of the base. I then used a Dremmel multi to carve out a groove, from where the rod exits the wood to the edge of the base. This will help model the destruction caused by the passing of the "death ray" Attachment 17925 A few inches of the rod on the end that will attach to the model, was re-shaped using a grinder. The idea was to create an ...
Post 1: Design and mock up This latest project started with the idea of converting a doom scythe kit, to make it more personal. After some thought I decided to do as I had with my Night scythe and make an interesting base. The main role of this flyer is to strafe the battlefield with its crudely named "death ray" so I wanted to have the model doing just that. After some thought, and playing around with the kit, I realised the only way to do this was to completely redesign ...
Updated 01-02-2013 at 07:46 PM by payzahh (typo)
Privacy Policy | Terms and Conditions | Contact Us | The Legion
Copyright © 2001-2018 CMON Inc.
Blog Categories
Recent Visitors
Archive
Go to Profile
Mark as Read
